Description
Preface. Chapter 1. Reactor Basics. 1.1 Fundamentals of Reaction Equilibrium and Kinetics. 1.2 Multiple Reactions. 1.3 Determining Kinetic Parameters. 1.4 Types and Fundamental Properties of Reactors. 1.5 Heat Transfer in Reactors. 1.6 Reactor Scale-Up. 1.7 Conclusion. Chapter 2. Steady-State Design of CSTR Systems. 2.1 Irreversible, Single Reactant. 2.2 Irreversible, Two Reactants. 2.3 Reversible Exothermic. 2.4 Consecutive Reactions. 2.5 Simultaneous Reactions. 2.6 Multiple CSTR’s. 2.7 Auto-Refrigerated Reactor. 2.8 Aspen Plus Simulation of CSTR’s. 2.9 Optimization of CSTR Systems. 2.10 Conclusion. Chapter 3. Control of CSTR Systems. 3.1 Irreversible, Single Reactant. 3.2 Reactor/Column Process with Two Reactants. 3.3 Auto-Refrigerated Reactor Control. 3.4 Reactor Temperature Control Using Feed Manipulation. 3.5 Aspen Dynamics Simulation of CSTR’s. 3.6 Conclusion. Chapter 4. Control of Batch Reactors. 4.1 Irreversible, Single Reactant. 4.2 Batch Reactor with Two Reactants. 4.3 Batch Reactor with Consecutive Reactions. 4.4 Aspen Plus Simulation using RBatch. 4.5 Ethanol Batch Fermentor. 4.6 Fed-Batch Hydrogenation Reactor. 4.7 Batch TML Reactor. 4.8 Fed-Batch Reactor with Multiple Reactions. 4.9 Conclusion. Chapter 5. Steady-State Design of Tubular Reactor Systems. 5.1 Introduction. 5.2 Types of Tubular Reactor Systems. 5.3 Tubular Reactors in Isolation. 5.4 Single Adiabatic Tubular Reactor System with Gas Recycle. 5.5 Multiple Adiabatic Tubular Reactors with Interstage Cooling. 5.6 Multiple Adiabatic Tubular Reactors with Cold-Shot Cooling. 5.7 Cooled Reactor System. 5.8 Tubular Reactor Simulation using Aspen Plus. 5.9 Conclusion. Chapter 6. Control of Tubular Reactor Systems. 6.1 Introduction. 6.2 Dynamic Model. 6.3 Control Structures. 6.4 Controller Tuning and Disturbances. 6.5 Results for Single Adiabatic Reactor System. 6.6 Multi-Stage Adiabatic Reactor System with Interstage Cooling. 6.7 Multi-Stage Adiabatic Reactor System with Cold-Shot Cooling. 6.8 Cooled Reactor System. 6.9 Cooled Reactor System with Hot Reaction. 6.10 Aspen Dynamics Simulation. 6.11 Plantwide Control of Methanol Process. 6.12 Conclusion . Chapter 7. Feed-Effluent Heat Exchangers. 7.1 Introduction. 7.2 Steady-State Design. 7.3 Linear Analysis. 7.31 Flowsheet FS1 without Furnace. 7.4 Nonlinear Simulation. 7.5. Hot Reaction Case. 7.6 Aspen Simulation. 7.7 Conclusion. Chapter 8. Control of Special Types of Industrial Reactors. 8.1 Fluidized Catalytic Crackers. 8.2 Gasifiers. 8.3 Fired Furnaces, Kilns and Driers. 8.4 Pulp Digesters. 8.5 Polymerization Reactors. 8.6 Biochemical Reactors. 8.7 Slurry Reactors. 8.8 Micro-Scale Reactors.
